Home Page
|
Terms & Conditions
|
View Basket Contents
|
Go to the Checkout
|
Contact Us
We value your feedback
Click here to make suggestions
Wood Weld PU - 310ml
Construction Chemicals WOOD WELD PU is a single component, solvent free, moisture curing polyurethane adhesive. WOOD WELD PU will bond most building materials to almost any other material; it is totally waterproof and conforms to D4 specification.
TYPICAL USES
WOOD WELD PU is a rapid curing, gap filling, polyurethane adhesive which can be used to bond all timbers (even wet or dry timber), concrete, polyurethane foam, expanded polystyrene, and other porous and non porous substrates. Once polymerised WOOD WELD PU is totally waterproof. WOOD WELD PU cures by mass therefore offers a high initial bond with a very fast handling strength.
WOOD WELD PU can also be used for:
· All joinery and shop fitting applications in particular oak framing, stair case building or where extra bond strength and speed is required.
· Bonding natural timber and laminate floor boarding, including bonding to asphalt.
· Can be used on resinous timber with no loss of bond strength.
· Ideal for pre treated timber when bonding with PVA is difficult.
· Boat building.
· Building applications, bonding bricks etc.
· Will also bond plastics, metals, MDF. The list is endless
BENEFITS OF USING WOOD WELD
· Thixotropic - It stays where you put it, less mess
· Rapid cure - Less cramping time, saves labour costs
· Easy to use - Standard 310ml cartridge
· High temp resistance - Can be used near ovens and light boxes
· 10min and 30min cure - Flexibility of adhesive when assembling
METHOD OF APPLICATION
· Ensure surfaces to be bonded are clean and free from grease, dust and any other contamination.
· To ensure best results when cleaning use Cleaner 3 (Flammable) allow solvent to evaporate before bonding.
· Dry porous materials usually contain sufficient moisture in order to create curing.
· Some metals i.e. untreated aluminium and galvanised steel require over spray with water in order to achieve a quick cure.
· Assemble before 5 minutes and apply an even pressure across the whole bond area whilst the bond cures.
· Allow the bond to fully cure usually 5-10mins.
· Allow excess adhesive to fully cure then trim off with a sharp edge, do not try to wipe of uncured adhesive as this will only make final cleaning more difficult.
HOW WOOD WELD PU WORKS
WOOD WELD PU is a moisture curing adhesive, therefore as soon as soon as it is dispensed from the cartridge it is exposed to moisture and begins to slightly expand, when the timber is cramped together this expansion continues and forces the adhesive into the grain of the timber at the same time as curing. This action welds the timber together extremely fast giving a joint that is stronger than the timber.
EASY TO USE
1. SELECT YOUR TIMBER
2. APPLY A SMALL AMOUNT OF WOOD WELD PU
3. CRAMP YOUR JOINT
4. WAIT 10 MINUTES
5. UNDO CRAMP, JOINT BONDED
6. TRIM OFF EXCESS ADHESIVE WHEN CURED
Chemical Base Polyurethane
Solids Content 100%
Appearance Translucent
viscosity Brookfield RVTI 20uC Thixotropic paste V = 5;
200,000mPas, V 50; 55,000 mPas
Density
1.03 @ 20 deg c
Skin formation time 5 mins @ 23 deg c
Flammability N/A
Application temp 10-25 deg c
Dilution solvent N/A
Packaging
WOOD WELD PU is available in 310m cartridges. Packed in boxes of 12.
Stored in unopened containers between 50C and 250C. WOOD WELD PU has a maximum shelf life of 12 months.
TODAY’S CUSTOMERS DEMAND PRODUCTS THAT WILL BE RELIABLE IN ALL BONDING SITUATIONS.
WOOD WELD PU IS THE BEST ADHESIVE YOU WILL EVER USE!
This Technical Data Sheet does not constitute a Material Safety Data Sheet. Before using this product ensure you have read and fully understood WOOD WELD PU Material Safety Data Sheet. Information presented on this sheet is not intended as a formal specification and should be used as a guideline only. Every endeavour has been made to ensure the accuracy of the information contained herein but customers should conduct their own tests to confirm to themselves the suitability of the product. Therefore construction chemicals Limited cannot accept any loss or damage that may result from the use of this information.
Wood Weld PU Health & Safety & Technical Data Sheet
Number of Cartridges (prices exclude VAT)
One (£6.50)
Box of 12 (£4.98 per cartridge)
5 Boxes of 12 (£4.50 per cartridge)
11 Boxes of 12 (£4.00 per cartridge)
Quantity:
1.
Oxalic Acid
Size - prices exclude VAT
25 kg - £75.00
5 kg - £25.00
Quantity:
2.
Envirosafe One Shot Injection Cream (DPC)
Size (prices exclude VAT)
5 Litres - £62.00
2 * 5 Litres - £61.00 each
5 * 5 Litres - £55.00 each
1 * 1 Litre - £15.60
6 * 1 Litre - £15.40 each
12 * 1 Litre - £15.00 each
380cc cartridge - £9.50
5 * 380cc cartridges - £7.85 each
10 * 380cc cartridges - £7.10 each
Quantity:
3.
Tanking Slurry - 25kg
Price:
£45.00
excluding VAT
Quantity:
4.
Wood Weld PU - 310ml
Number of Cartridges (prices exclude VAT)
One (£6.50)
Box of 12 (£4.98 per cartridge)
5 Boxes of 12 (£4.50 per cartridge)
11 Boxes of 12 (£4.00 per cartridge)
Quantity:
