Home Page
|
Terms & Conditions
|
View Basket Contents
|
Go to the Checkout
|
Contact Us
We value your feedback
Click here to make suggestions
Safe 80 Contact Adhesive - 5 Litres
Evo-Stick Safe 80 is a non-flammable polychloroprene rubber latex based adhesive which changed from white to translucent when dry. It is economical in use and gives excellent bond strength and good heat resistance.
RECOMMENDED USE
Evo-Stick Safe 80 can be used for bonding most types of materials such as textiles, rubbers and plastic laminates to wood, plywood, chipboard etc.
It may also be used for bonding smooth porous surfaces of concrete or plaster as well as canvas and expanded polystyrene.
Non-porous materials such as metals and painted surfaces may be bonded provided that the adhesive films are allowed to dry completely before the bond is made.
SURFACE PREPARATION
Substrates to be bonded should be perfectly clean, dry and free from dust and grease.
Smooth or polished surfaces should first be roughened with fine abrasive.
Rubber and similar material must be abraded well and then the bonding area vigorously wiped with a cloth damped with Evo-Stick Adhesives Cleaner (a solvent based cleaner). Without such treatment a poor bond will result.
If degreasing in necessary use Evo-Stick Adhesive Cleaner.
APPLICATION
· Evo-Stick Safe 80 is suitable for application by brush, paint roller, sponge or spray techniques.
· The use of a notched or serrated spreader is not recommended as too much adhesive will be applied and this will take very much longer to dry.
· Thoroughly stir the contents of the container before use.
· Application by paint pad or by roller is very quick and applies a smooth thin layers of adhesive which will dry reasonably quickly.
· Both surfaces to be bonded should be coated with an even coat of adhesive and allowed to dry.
· Porous surfaces such as plaster may require a second coat. The milky white opaque adhesive becomes nearly clear when dry.
· The adhesive dries by evaporation of water into the atmosphere and on porous substrates also by absorption of the water into the pores.
· The drying time is very dependent on substrate, coating weight, temperature and humidity. Under normal conditions the film dries in 30 minutes.
· The process can be accelerated by warming e.g. by radiant heat of by passage of a current of warm air over the surface.
· If is often economical to batch apply the adhesive and then bond after a set period of approximately 3 hours.
BONDING
Bring the two dry coated surfaces into contact, preferably within 120 minutes of drying and press together over the entire bond area.
Apply as much pressure as possible by hand roller, static press or nip roller without causing damage. Sustained pressure is not necessary.
Coverage – Approximately 9m² per litre on a single surface when applied by roller.
Shelf life – Up to 12 months from the date of manufacture when stored as shown below.
Storage – Store under dry conditions before 5ºC and 25ºC.
Colour – White (translucent when dry).
Safe 80 Contact Adhesive Health & Safety & Technical Data Sheet
Price:
£46.87
excluding VAT
Quantity:
1.
Oxalic Acid
Size - prices exclude VAT
25 kg - £75.00
5 kg - £25.00
Quantity:
2.
Envirosafe One Shot Injection Cream (DPC)
Size (prices exclude VAT)
5 Litres - £62.00
2 * 5 Litres - £61.00 each
5 * 5 Litres - £55.00 each
1 * 1 Litre - £15.60
6 * 1 Litre - £15.40 each
12 * 1 Litre - £15.00 each
380cc cartridge - £9.50
5 * 380cc cartridges - £7.85 each
10 * 380cc cartridges - £7.10 each
Quantity:
3.
Tanking Slurry - 25kg
Price:
£45.00
excluding VAT
Quantity:
4.
Wood Weld PU - 310ml
Number of Cartridges (prices exclude VAT)
One (£6.50)
Box of 12 (£4.98 per cartridge)
5 Boxes of 12 (£4.50 per cartridge)
11 Boxes of 12 (£4.00 per cartridge)
Quantity:
